Information percolation and cutoff for the random‐cluster model

We consider the random‐cluster model (RCM) on with parameters p∈(0,1) and q ≥ 1. This is a generalization of the standard bond percolation (with edges open independently with probability p) which is biased by a factor q raised to the number of connected components. We study the well‐known Fortuin‐Kasteleyn (FK)‐dynamics on this model where the update at an edge depends on the global geometry of the system unlike the Glauber heat‐bath dynamics for spin systems, and prove that for all small enough p (depending on the dimension) and any q>1, the FK‐dynamics exhibits the cutoff phenomenon at with a window size , where λ_∞ is the large n limit of the spectral gap of the process. Our proof extends the information percolation framework of Lubetzky and Sly to the RCM and also relies on the arguments of Blanca and Sinclair who proved a sharp mixing time bound for the planar version. A key aspect of our proof is the analysis of the effect of a sequence of dependent (across time) Bernoulli percolations extracted from the graphical construction of the dynamics, on how information propagates.     

Unexpected Hole Doping of Graphene by Osmium Adatoms

The electronic transport of monolayer graphene devices is studied before and after in situ deposition of a sub-monolayer coating of osmium adatoms. Unexpectedly, and unlike all other metallic adatoms studied to date, osmium adatoms shift the charge neutrality point to more positive gate voltages. This indicates that osmium adatoms act as electron acceptors and thus leave the graphene hole-doped. Analysis of transport data suggest that Os adatoms behave as charged impurity scatterers, albeit with a surprisingly low charge-doping efficiency. The charge neutrality point of graphene is found to vary non-monotonically with gate voltage as the sample is warmed to room temperature, suggesting that osmium diffuses on the surface but is not completely removed.     

Palladium-Catalyzed Chlorocarbonylation of Aryl (Pseudo)Halides Through In Situ Generation of Carbon Monoxide

An efficient palladium-catalyzed chlorocarbonylation of aryl (pseudo)halides that gives access to a wide range of carboxylic acid derivatives has been developed. The use of butyryl chloride as a combined CO and Cl source eludes the need for toxic, gaseous carbon monoxide, thus facilitating the synthesis of high-value products from readily available aryl (pseudo)halides. The combination of palladium(0), Xantphos, and an amine base is essential to promote this broadly applicable catalytic reaction. Overall, this reaction provides access to a great variety of carbonyl-containing products through in situ transformation of the generated aroyl chloride. Combined experimental and computational studies support a reaction mechanism involving in situ generation of CO.     

Reverse Thinking of the Aggregation-Induced Emission Principle: Amplifying Molecular Motions to Boost Photothermal Efficiency of Nanofibers**

Using reverse thinking of the aggregation-induced emission (AIE) principle, we demonstrate an ingenious and universal protocol for amplifying molecular motions to boost photothermal efficiency of fibers. Core–shell nanofibers having the olive oil solution of AIE-active molecules as the core surrounded by PVDF-HFP shell were constructed by coaxial electrospinning. The molecularly dissolved state of AIE-active molecules allows them to freely rotate and/or vibrate in nanofibers upon photoexcitation and thus significantly elevates the proportion of non-radiative energy dissipation, affording impressive heat-generating efficiency. Photothermal evaluation shows that the core–shell nanofibers with excellent durability can reach up to 22.36 % of photothermal conversion efficiency, which is 26-fold as the non-core–shell counterpart. Such a core–shell fiber can be used for photothermal textiles and solar steam generation induced by natural sunlight with green and carbon-zero emission.     

Highly Specific,Single-step Cancer Cell Isolation with Multi-Aptamer-Mediated Proximity Ligation on Live Cell Membranes

A single-step method for isolation of specific cells based on multiple surface markers will have unique advantages because of its scalability, efficacy, and mildness. Herein, we developed multi-aptamer-mediated proximity ligation method on live cell membranes that leverages a multi-receptor co-recognition design for enhanced specificity, as well as a robust in situ signal amplification design for improved sensitivity of cell isolation. We demonstrated the promising efficacy of our method on differentiating tumor cell subtypes in both cell mixtures and clinical samples. Owing to its simple and fast operation with excellent cell isolation sensitivity and accuracy, this approach will have broad applications in biological science, biomedical engineering, and personalized medicine.     

Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Theoretical studies of photovoltaic properties of five new silol dithiophene based D2-A-D1-A-D2 donors

Organic solar cell of silol dithiophene based D₂-A-D₁-A-D₂/PC₇₁BM (D: donor part; A: acceptor part; 1 and 2 denote different units) possesses promising power conversion efficiency. Researchers have studied D₂-A-D₁-A-D₂ molecules carefully, including the effects of the different number of terminal thiophenes, the different central moiety (D₁), and the length of the alkyl chain. However, there are few investigations, especially theoretical studies, on the influences of different A (acceptor) units on the properties of D₂-A-D₁-A-D₂ molecule. In the present work, we have designed and modeled five new D₂-A-D₁-A-D₂ (D₂ = bithiophene and D₁ = silol dithiophene) donors by changing A units (A = diketopyrrolopyrrole, naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole, 5-fluoro-2,1,3-benzoselenadiazole, benzobisthiadiazole, and thiazolo[5,4-d]thiazole). We have applied density functional theory (DFT) and time-dependent DFT to predict their ground-state electronic structures and the UV–vis spectra, and the open circuit voltages (Vocs) of organic solar cells of D₂-A-D₁-A-D₂/PC₇₁BM. Based on the calculated results, we find that bithiophene thiazolo[5,4-d]thiazole siloldithiophene (BTTS) (D₂ = bithiophene, A = thiazolo[5,4-d]thiazole, D₁ = silol dithiophene) possesses the highest lowest unoccupied molecular orbital (−2.60 eV) and the lowest highest occupied molecular orbital (−5.33 eV) energies, and the strongest absorption in the visible region. Besides, the solar cell of BTTS/PC₇₁BM has the highest Voc of 1.02 V. These results indicate that it may be a promising donor. In contrast, bithiophene benzobisthiadiazole siloldithiophene (BBBS) (A = benzobisthiadiazole) has low absorption strength in the visible region, which indicates that it may not be a suitable donor material.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

热光伏能量转换器件的热力学极限与优化性能预测

受不可逆损失的影响,热光伏能量转换器件在高品位热能回收与利用方面受到限制.本文揭示不可逆损失来源,提供热光伏能量转换器件性能提升方案.利用半导体物理和普朗克热辐射理论,确定热光伏能量转换器件在理想条件下的最大效率.进而考虑Auger与Shockley-Reed-Hall非辐射复合和不可逆传热损失对光伏电池的电学、光学和热学特性的影响,预测热光伏器件优化性能.确定功率密度、效率和光子截止能量的优化区间.结果表明:相比于理想热光伏器件,非理想热光伏器件的开路电压、短路电流密度和效率有所降低;优化热光伏电池电压、光子截止能量和热源温度,可提升器件的功率密度和效率.通过对比发现理论与实验结果较一致,所得结果可为实际热光伏能量转换器件的研制提供理论指导.